Please leave a little thank you...

If you do any of my tutorials could you please leave me a little message in the shoutbox i would like to hear what you think of them also would love to see your results you can email them to me my email addy is at the bottom of my terms of use.. thanks...

Sunday, November 30, 2008

Hi everyone,
just letting you all know that Gaylene will not be able to reply
to any comments untill she gets her internet back.
She thanks you all for all your lovely comments and
will reply to them when her internet is fixed.
Hugs from Natty xx

Tuesday, November 25, 2008

Snow Kids



This tutorial was written by me on November 25th 2008
Any similarity to any other tutorial is purely coincidental
This tutorial was written in psp8 but should work in other versions.
This tutorial is so easy just copy and pasting lol

Tools needed

Tube of choice
Scrap-kit
Mask WSL_mask88

Download the mask below
Click on navigate then downloads
Snow animation(in supplies)

Put the mask in your psp mask folder

Scrap-kit Snow Kids PTU from Krissy
Open new image 700x590
Copy and paste paper of choice as new layer
Layers,load save mask from disc find WSL_mask 88
Load, layers merge group
Layers duplicate, make the original mask layer active
Image resize 110%,
Adjust, blur, gaussian blur
Put radius on 15
Add some effects to the mask
I used Cybia screenworks, fine rule
Make the top layer active
Copy and paste snow covered house as new layer
Image resize about 80% move up a little
See my tag for reference
Copy and paste Christmas tree 1 as new layer
Image resize 60%
Place to the left of your tag
Layers duplicate,image mirror
Add drop shadow to the house and tree's
Copy and paste snowman 2 as new layer
Image resize 60%
Move to the right do the tag
Drag this layer under the tree layer
Layers duplicate, image mirror
Add drop-shadow to both layers
Now add what elements you want on your tag
Adding drop-shadow to each layer
When finished add your name and any copyrights
Now for the animation
Open the snow I have supplied in animation shop
You will see it has 10 frames
Back to psp
Copy merge paste as new aninmation
In animation shop
We have to make your tag have 10 frames
Right click on your tag and duplicate
Do this till you have 10 frames
Now back to the snow
Edit, select all, edit copy
Back to your tag click on the first frame
Then edit, select all
Edit paste in current frame keep the mouse pressed and place
The snow on your tag
When satisfied release the mouse
View the animation if all is ok
Save
Thanks for doing my tutorial
Gaylene


Monday, November 24, 2008

Midnight Blue


This tutorial was written by me on November 25th 2008

Any similarity to any other tutorial is purely coincidental
This tutorial was written in psp8 but should work in other versions.

Tools needed

Tube of choice
Scrap-kit
Mask.... Zuz_mask (in supplies)

SUPPLIES

Scrap-kit Midnight Blue freebie from Dee
Thanks so much this is a beautiful kit

http://designsbydee.blogspot.com/

Download HERE

I am using the beautiful artwork of Jennifer Janesko
You must have a lic to use her artwork

Put the mask in your psp mask folder

Open a new white image 700x590
Open paper 2 in psp
Image resize all layer 700x590 pixels
Copy and paste as new layer
Layers, load save mask from disc
Find zuz_mask load
Layers merge group
Open frame 7 in psp image resize 20%
Copy and paste as new layer
Click inside of frame with magic wand
Selections, modify expand by 4
Copy and paste paper of choice as new layer
Selections, invert, hit delete, select none
Drag this layer under the frame layer
Now copy and paste the tube as new layer
Place under the frame layer
You may have to erase some of the tube
Drop shadow the frame and tube
Now add what elements you want on your tag
Drop shadow each layer as you go
I also added some sparkles to the mask layer
When finished adding elements
Add your name and any copyrights
Layers merge all
Save
Thanks for doing my tutorial
Gaylene

Treasured friends award



I received this award from 3 beautiful friends..
thanks so much gurls for giving me this award

Missy

Kathleen

Aimee

Now i have to pass it onto 5 friends who havn't received it yet
i give this award to..

Betsy

Vaybs

Lesley

Nancy

MzJen

i am passing this award on to the above
hugs Gaylene
xox





Monday, November 17, 2008

Plum Gorjuss



click tag to see full size

This tutorial was written by me on November 18th 2008

Tools needed

Tube

Mask

Scrap-kit

Plugins needed:

Xenofex 2 constellation

Muras Meister, copies

Put the mask in your psp mask folder

Scrap-kit Gorjuss Plums freebie from Jill
Download below
I'm using background and tube from Suzanne Woolcott
This is a PTU tube so I can't supply it

Mask sg_multi-leafy-grungeframe1
It's on page 24
Open new white image 700x590
Copy and paste paper 3 as new layer
Layers, load save mask from disc
Find the mask sg_multi-leafy-grungeframe1
Load, layers merge group
Duplicate,layers merge down
Copy and paste frame 7 as new layer
Layers, duplicate, image resize 90%
I've added a texture to both of the frames
Make the top frame active
Effects, Xenofex 2 constellation
With the settings below
2
6
1
1
100
55
45
Keep original image ticked
Click ok
Add drop shadow to both frames
Settings below
V&H..3
opacity..60
blur..7
Black
Add drop-shadow again but change the 3 to -3
Add background of choice and tube inside the frame
Drag this layer down below the frame layer
Erase any parts outside the frame
Add drop-shadow to the tube
Make the top layer active
Copy and paste flower 8 as new layer
Image resize 10%
Don't move the flower
Effects Muras Meister, copies
With settings below
Put on circle
Number on 16
Shift X 46
Shift Y 52
Leave other setting the same
Load
Image resize 120% 2 times
Move below the frame layer
You may have to erase a little of the flowers in the frame
Add drop-shadow and sharpen
Now add what elements you want on your tag
Adding drop-shadow to each layer
When finished add your name and any copyrights
Layers merge all
Save
Hope you enjoyed doing my tutorial
Gaylene

My other tutorial site has nearly 25,000 hits
in about 4 months thanks so much you all
you can find my old tutorial site HERE
and a big THANK YOU to Kathleen for putting
all those tutorial in for me xxx

Friday, November 14, 2008

Aussie Christmas


click image to enlarge

This tutorial was written by me
As I am an Aussie just had to use this scrap-kit pmpl

Tools needed

Tube
Scrap-kit
Template
Vix Mask 139

For the mask click the link below, then click on goodies
Put the mask in your psp mask folder

Template ...Xmas Template 01 from Vaybs
Scrap-kit Aussie Christmas freebie from Shari
Thanks so much I love it..
I am using a garv tube
As this is a PTU tube I can't supply it

Open the template in psp, windows duplicate
And close the original
Delete the credit layer
Close of all the template layers except raster 8
Make raster 8 active
Selections,select all, selections float,
Now open paper of choice in psp
Resize about 30%
Copy and paste into selection
Select none
Make the next layer active
Do the same as above
Now do the same to all the template layers
I just colorized the circle word art
When finished add drop-shadow to all layers
V&H..3
opacity..60
blur..7
Blackadd a background to the round layer
Then add some writing to your round layer
See my tag for reference lol
Copy and paste your tube as new layer
Add drop-shadow
Make the background layer active
Layers, new raster layer
Open the gold background in psp, resize
Copy and paste gold background as new layer
Layers, load save mask from disc
Find Vix mask 139, click load
Layers merge group
Layers duplicate, image flip
Add drop-shadow
Add your name and any copyrights
Layers merge all
Save
Thanks for doing my tutorial
Gaylene

Thursday, November 13, 2008

Happy Holidays


This tutorial was written by me November 2008

Please don't copy

Tools needed

Tube

Scrap-kit

Mask sg_laced-file (mask page 29)

Candle flame


Plugin needed : Xenofex 2 constellation

Put the mask in your psp mask folder

Scrap-kit Christmas Tradition PTU from Baby Cakes Scraps

Thanks Lynne its beautiful

You can purchase it HERE

Mask sg_laced_file from essex girl down load below

I am using the beautiful artwork of Barbara Jensen
As this is a PTU tube you have to have a licence
So I can't supply it.

Open a new white image 700x590
Open the book in psp
Copy and paste as new layer
Layers, load save mask from disc
Find the mask I supplied, load
Layers merge group
Open happy in psp, image resize 30%
Copy and paste as new layer see my tag for placement
Do the same for holidays
Copy and paste your tube as new layer
Place bottom right of your tag
Add drop-shadow to all layers except the mask layer
Open candle cluster in psp
Image resize 70%
Place bottom left of your tag, and drop-shadow
Open holiday cluster in psp
Copy and paste as new layer, image resize 10%
Place top left of the tag,duplicate, mirror,duplicate,flip,duplicate mirror
Add drop-shadow to the 4 layers
Open red bow in psp
Copy and paste as new layer
Image resize 20% place top middle add drop-shadow
Add more elements of choice adding drop-shadow after each layer
When finished add your name and any copyrights to your tag
If you not going to animate
Layers merge all
Save

ANIMATION

Open your candle flame in animation shop
if you have one
As it has 4 frames we have to make the sparkles with 4 frames
Make the little blue sparkles layer active
Effects,Xenofex 2 constellation
Settings below
Star size 2.00
0
1
1
100
85
Twinkle rotation 45
Keep original image ticked
Click ok
Copy merge and paste in AS as new animation
Back to psp
Undo the twinkles
Now do the twinkles again but hit the random seed once
Copy merge and paste in AS after current frame
Do above so you have 4 frames in AS
Ok now to add the candles
Edit, select all, edit copy
Back to your tag
Edit, select all,edit paste into selected frame
Do this till you have the 3 candle flames
Now save
Thanks for doing my tutorial
Gaylene
Xox


Tuesday, November 11, 2008

Autumn Wishes


click tag to see full size

This tutorial was written by me on November 12th 2008
Any similarity to any other tutorial is purely coincidental

Tools needed

Tube of choice
Scrap-kit
Template of choice
Mask.... 179 (in supplies)

I don't know where I got the mask if it's yours
Please let me know and I will give you proper credit.

Put the mask in your psp mask folder


Scrap-kit Autumn Wishes FTU and the Template from Kirsty
Thanks so much Hun it's beautiful

She has closed her blog sorry

I am using the beautiful artwork of Jennifer Janesko
You must have a lic to use her artwork

Open the template in psp
Windows, duplicate get rid of the original
Delete the copyrights
Layers new raster layer
Floodfill with white
Drag this layer to the bottom
Open a paper of choice in psp
As you will see this kit is huge lol
So resize the paper to 600x600 pixels
All layers clicked
Copy and paste as new layer
Layers, load save mask from disc find mask 179
Load, layers merge group
Now make the first layer of the template active
Selections,select all, float
Open another paper in psp, resize then
Paste into selection, select none
Do the same as above for all the template layers
When finished add drop-shadow to all layers
I sharpened mine but you don't have to
I also duplicated the doodle layer
Mirrored then flipped it
Copy and paste your tube as new layer
Place in the center of the frame
Duplicate the top frame
Drag this layer above the tube layer
Erase what parts of the frame you want to
So the tube looks like mine
Copy and paste what elements you want to use
Resizing them heaps as you go
Adding a drop-shadow to each layer
And sharpen if you want to
When finished add your name and any CR
Layers merge all
Save

Thanks for doing this tutorial
Gaylene

Autumn Splendor


This tutorial was written by me November 12th 2008

Tools needed

Tube of choice
Scrap-kit
Mask ...BflyFlby mask23
Animated Bee's (in supplies)
Background (in supplies)

If the Bee's are yours please let me know
and I will credit you.

SUPPLIES

Plugin...Muras Meister, copies

Mask from ButterflyFlutterby Creations
You will have to click on older posts a couple of times

Put the mask in your psp mask folder

I am using the gorgeous artwork from Barbara Jenson
So I can't supply the tube

Scrap-kit Fall Frolic PTU from MoonBeams Creations
You can purchase the kit from HERE

Open new white image 650x650
Copy and paste paper of choice as new layer
Layers new mask layer from disc
Find BflyFlby mask23
Load,layers merge group
Image resize 105%
Copy and paste another paper of choice as new layer
Repeat above steps but don't resize
Copy and paste frame of choice as new layer
Resize 120% 2 times or till it fits in the mask
Copy and paste background I supplies as new layer
Drag this layer under the frame layer
Delete the background outside the frame
Add drop-shadow to frame and background
Copy and paste flower of choice as new layer
Image resize about 30%
Effects, Muras Meister, copies
Just change the number to 12
And use circle, click ok
Image resize110% 2 times
Drag this layer below the background layer
Add drop-shadow I also added some noise
Copy and paste tube of choice
Resize if you have to
Add drop-shadow
Add some writing in the frame if you want
I also added some noise and drop-shadow
Add what elements you want on your tag
Adding drop-shadow to each layer
When finished add your name and any copyrights
If you are not going to add the bee's
Layers merge all
Save

ANIMATION

Copy merge your tag and paste in animation shop as new animation
Open the bee's in animation shop
You will see the bee's have 12 frames
So we have to make your tag have 12 frames as well
Left click then Right click on your tag
Layers duplicate selected, keep doing this till you have 12 frames
Pull the scroll bar down to the bottom of your tag
That way you can see how many frames you have done
When finished adding the frames push the bottom scroll bar to the left
So you can see frame 1
Now back to the bee's, edit, select all, edit copy
Back to your tag edit, select all,edit paste into selected frame
Move the mouse to where you want the bee's
Then click the mouse once
Click on view animation and see if it's animated
If happy click on view animation again
Save
Thanks for doing my tutorial
Gaylene

Monday, November 10, 2008

Winter Snow



This tutorial was written by me...

Supplies need

Tube of choice

I am using the artwork of Jamie Kidd
As this is a PTU tube I can't supply it as you have to have a license to use it.

Background and snow in supplies

Template 98 by Ali download HERE

Scrap-kit Ice Candy Christmas freebie by Flashgraphics Creations
Download HERE
Download the word-art also

Plugins
Effects, cybia screenworks, fine rule,

Open the template by Ali. Duplicate and close the original.
Layers new raster layer, floodfill with white
Drag to the bottom in the layers pallette
Delete the top layer. Highlight the shape 1 layer. Select all, float, defloat
Copy and paste a paper as a new layer
Invert, delete, select none. Delete the template layer
Selections. Select all, float
Add drop shadow
V&H..3
Opacity..60
Blur..7
Black
Select none
Highlight the shape 2 layer
Repeat above steps
Now do the above steps on all the template layers
When finished add the background iv'e supplied as new layer
Place in the center erase any of the background outside
See my tag for reference if you wish to
Now make raster 5 active the outside snow
Layers duplicate, make the original layer acive
Adjust, blur, gaussian blur on 10 click ok
Effects, cybia screenworks, fine rule, mode on 0 click ok
Make the top layer active
Copy and paste your tube of choice as new layer
Add drop-shadow same settings as above
Now copy and paste elements of choice as new layers
Adding same drop-shadow as above
Add your name and any copyrights
If not animating layers merge all, save

ANIMATION

OK HERE GOES HOPE YOU UNDERSTAND THIS LOL

Open the snow I have supplied in AS
Back to psp
Close of all layers except the bottom 6 layers
Make the bottom layer active
Layer, copy merge and paste in AS as new animation
Now the snow has 20 layers so we have to make 20 layers on your tag

Left click then Right click on your tag

Layers duplicate selected keep doing this till you have 20 frames

Pull the scroll bar down to the bottom of your tag

That way you can see how many frames you have done

When finished adding the frames push the bottom scroll bar to the left

So you can see frame 1

Now back to the snow, edit, select all, edit copy

Back to your tag left click in the first frame

Edit select all, edit paste into selected frame

Move your mouse and place the snow on the background

Click on view animation and see if it's animated

If happy click on view animation again

Back to psp

Now lock the bottom 6 layers

And unlock all the other layers

Make the top layer active copy merge and paste in AS as new animation

Now do the same as above to make 20 frames

And also the same as above to add it to your tag

Making sure you place it carefully

When finished view animation if happy click on view animation again

Save

Phew all finished lol
Hope you had fun doing this tutorial
Gaylene

Completely Adorable


click on tag to enlarge and see animation

This tutorial was written by be on November 11th 2008

Tools needed

Tube

Template

Scrap-kit

Heart animation (in supplies)


Plugin needed...Cybia screenworks, aged mosaic


SUPPLIES


Template 4 from Enchanted Scraps

http://enchantedscraps.blogspot.com/


Scrap-kit PTU Ultimate Elegance from Cindy

Scrapin with lil ole me

Download below

http://www.creativescrapsstore.com/


I'm using the beautiful tubes from Suzanne Woolcott
You must have a licence to use her artwork.

Open the template in psp

Windows, duplicate, get rid of the original template

Delete the copyright layer

Make the doodle art layer active, selections, select all, float

Copy and paste paper of choice into selection, select none

Layers duplicate, make the original layer active

Adjust, blur, gaussian blur radius on 25

Effects, cybia screenworks, aged mosaic mode on 0

Make the circle layer active selections, select all, float

Copy and paste paper of choice into selection, select none

Do the same as above for the rest of the template

When finished add drop-shadow to each layer

Copy and paste your tubes as new layers

Add drop-shadow to both tubes

Copy and paste what elements you want on your tag

Add drop-shadow as you go

When finished add your name and any copyrights

If not going to animate

Layers merge all

Save

Now we going to animate the tag

X out the cat or is it a dog lol

Make the background layer active copy merge and paste in animation shop

As new animation

Open the hearts I have supplied in AS

You will see it has 9 frames so we have to make your tag with 9 frames also

Left click then Right click on your tag

Layers duplicate selected keep doing this till you have 9 frames

Pull the scroll bar down to the bottom of your tag

That way you can see how many frames you have done

When finished adding the frames push the bottom scroll bar to the left

So you can see frame 1

Now back to the hearts, edit, select all, edit copy

Back to your tag left click in the first frame

Edit select all, edit paste into selected frame

Move your mouse and place the hearts where you want them

Click on view animation and see if they are animated

If happy click on view animation again

Back to psp

Unlock the cat or dog lol

Make this layer active, copy and paste as new animation in AS

Now do the same as above to make 9 frames

And also the same as above to add the cat or dog to your tag

When finished view animation if happy click on view animation again

Save

OMG see Zee this is why I hate explaining animation lmao

Hope you enjoyed doing my tutorial

Gaylene

Sunday, November 9, 2008

Antiqued Romance


click on tag to enlarge

This tutorial was written by Gaylene on November 10th 2008
Any similarity to any other tutorial is purely coincidental

Tools needed

Tube of choice
Scrap-kit
Mask.... SaraLettersMask (in supplies)
I'm hooked on this mask lol

Put the mask in your psp mask folder

Plugin needed...filters unlimited2 edge square, square edge1

Scrap-kit Antiqued Romance PTU
Thanks so much Krissy this is the most beautiful kit

http://gigglygirlscrapz.blogspot.com/

You can purchase the scrap-kit HERE

look to the left you will see Giggly Girl Scraps

I am using the beautiful artwork of Jennifer Janesko
You must have a lic to use her artwork

Open new white image 700x600
Selections,select all, layers new raster layer
Copy and paste paper 2 into selection
Select none
Layers,load save mask from disc
Find the mask SaraLettersMask , load
Layers merge group
Copy and paste frame 1 as new layer
Image resize 70%
open paper of choice in psp
image resize 60%,
copy and paste as new layer
drag this layer under the frame layer
erase parts of the background outside the frame
Keep this layer active
copy and paste tube of choice
resize so it fits in the frame
close of all the layers except the frame,background and tube layers
layers merge visable
open the other layers now
add drop-shadow to this layer
image,rotate,free rotate 15 right
place bottom right of your tag
see my tag for placement
copy and paste old book as new layer
Resize if you want I didn't
place bottom left of tag
add drop-shadow
copy and paste your main tube as new layer
place on the book
Add drop-shadow to tube
Make the mask layer active
Copy and paste the journalling paper as new layer
Image resize about 110%
Now copy and paste what elements you want on your tag
Adding a drop-shadow to each layer
See my tag for reference if you want
Lastly open the postcard in psp
Selections,select all,float
Filters unlimited2 edge square,square edge1
Now copy and paste as new image
Get rid of the original postcard
Make the background layer active
Copy and paste postcard as new layer
Image resize 120% a couple of times
I reduced the opacity to about 42 also
I also have duplicated the mask layer a couple of times
To make it darker lol
Now add your name and any copy-rights
Layers merge all
Save
Thanks for doing my tutorial
Gaylene

Thursday, November 6, 2008

Secret Rendez-vous


click on tag to see full size

Thank you everyone for all the beautiful emails
i have received complimenting me on this tutorial
hugs Gaylene xxx

This tutorial was written by me on November 7th 2008
Any similarity to any other tutorial is purely coincidental

Tools needed

Tube of choice
Scrap-kit
Mask (sg_etched-octagon ) in supplies



Put the mask in your psp mask folder

Scrap-kit Secret Rendez-vous PTU
Created by Chadesignz
Download HERE

I am using the gorgeous artwork from Barbara Jenson
So I can't supply the tube

Open new white image 600x600
Copy and paste paper 6 as new layer
Layers,load save mask from disc
Find the mask sg_etched-octagon,load
Layers merge group
Copy and paste paper 10 as new layer
Apply the mask again
Copy and paste the letter as new layer
Image resize 55%
Place on the mask where you want it
Copy and paste frame as new layer
Image resize 90%, place on the letter
Copy and paste tube of choice as new layer
Place on the frame where you want it
You might have to resize the tube
Now duplicate the frame
As drag above the tube layer
Erase parts of the frame you want
See my tag for reference
Add drop-shadow to letter,original frame and tube
V&H...3
opacity...50
Blur...7
Black
Copy and paste what elements you want on your tag
Adding a drop-shadow to each layer
Same settings as above
When finished add your name
And any copyrights
Layers merge all
Save


Wednesday, November 5, 2008

A Mousey Christmas


click on tag to enlarge
this is the most gorgeous scrap-kit well worth the money

This tutorial was written by me on November 6th 2008
Any similarity to any other tutorial is purely coincidental

Tools needed

Tube of choice
Scrap-kit
Mask... Sg_geometric-grunge frame1
Christmas wreathe of choice

The mask i have used is from Essex Girl
download HERE

I have used a Keith Garvey tube
You can purchase the tube from MPT
As this is a PTU tube I can't supply it

Scrap-kit A Mousey Christmas
You can purchase it HERE

Open new white image 700x600
Copy and paste paper of choice as new layer
Layers,load save mask from disc
Find sg_geometric-grunge frame1 mask
Apply, layers merge group
Copy and paste the Christmas wreathe
As new layer see my tag for placement
I duplicated and mirrored it also
Then after I added my elements I erased some parts
Copy and paste your tube as new layer
Place where you want it
Drop-shadow everything above except the mask layer
V&H...3
opacity...50
blur...7
Black
Now add what elements you want on your tag
They are so gorgeous so I used heaps lol
Add drop-shadow after each layer
When finished add your name
And any copyrights to your tag
Layers merge all
Save


Sweet and Innocent

Image and video hosting by TinyPic


This tutorial was written by me on November 5th 2008
Any similarity to any other tutorial is purely coincidental

This tag is dedicated to my mate Natalie
Hope you like it pmpl...

Tools needed

Tube of choice
Scrap-kit
Word-art
Doodle
Mask... Vix_Mask197 in supplies

Plugin...DSB Flux bright noise

Scrap-kit Sweet and Innocent freebie from Natalie
she has deleted her blog and has given me permission to download it

I have used a Keith Garvey tube
As this is a PTU tube I can't supply it

Open new white image 700x600
Open paper 6 in psp, image resize 70%
Layers,load save mask from disc
Find the mask Vix_Mask197, load
Layers merge group
Open paper 5 in psp and do the same as above
Resize this mask layer slightly about 105%
Open paper 6 again in psp
Resize 55%, copy and paste as new layer
Image,rotate, free rotate 15 left
Repeat above steps for paper 5
But rotate 15 right
Copy and paste paper 4 as new layer
Image resize 55%
Copy and paste frame 4 as new layer
Resize 55%
Make paper 4 layer active
Add what effects you want to paper 4
Add drop-shadow to all layers except the mask layers
Add some word-art
Copy and paste tube of choice as new layer
Add drop-shadow
Copy and paste what elements you want to use
Adding slight drop-shadow to each layer
When finished add your name
And any copyrights to your tag
If you not going to animate
Layers merge all
Save

Animation

Make the paper 4 layer active
Effects DSB Flux bright noise
Intensity on 42
And have mix clicked
Now click mix one time, then ok
Copy merge and paste in animation shop
As new animation
Back to psp and undo the noise
Now do the noise again but click mix 2 times then ok
Copy merge and paste in animation shop after current frame
Back to psp and undo noise
Do noise again but click on mix 3 times
Copy merge and paste in animation shop after current frame
View your animation if all ok
Save

Tuesday, November 4, 2008

Breathless


click on tag to view full size

This tutorial was written by me on November 5th 2008
Any similarity to any other tutorial is purely coincidental

Tools needed

Tube of choice
Scrap-kit
Mask WSL_mask 109 from Weescotlass

Put the mask in your psp mask folder

Plugin needed...Cybia..screenworks, fine rule

Scrap-kit Breathless PTU from Simply Irresistible
Download below
I am using the gorgeous artwork from Barbara Jenson
So I can't supply the tube

Open new white image 700x600
Copy and paste paper of choice as new layer
Layers,load save mask from disc
Find WSL-mask 109 and apply
Layers merge group
Layers duplicate, make the original mask layer active
Adjust blur, gaussian blur put radius on 10
Cybia, screen-works fine rule click ok
I duplicated and flipped mine again lol
Make the top layer active
Copy and paste frame of choice as new layer
Resize if you have to now duplicate again
And resize 90%
Now duplicate again and resize 90%
I colourised my middle frame
With #617482 but you can use what you want
Now copy and paste your tube of choice as new layer
Add drop-shadow to all frames and the tube
Add what elements you want to use
Adding drop-shadow to each layer as you go
Add some writing to the tag 2 if you want also
When finished adding your elements
Add your name and any copyrights
Layers merge all
Save

Goldelicious Christmas


click on image to see full size

This tutorial was written by me on November 4th 2008
Any similarity to any other tutorial is purely coincidental
Tools needed

Tube of choice
Scrap-kit
Mask ...WSL-mask 120

Put the mask in your psp mask folder

Mask from Chelle click on link to download
Click on navigate then downloads
The tube I am using is a PTU tube from Keith Garvey
So I can't supply it

Scrap-kit Goldelicious Christmas PTU from Lena
You can purchased this scrap-kit from
Open new white image 600x600
Selections, select all,layers new raster layer
Copy and paste paper 11 into selection
Select none
Layers, load save mask from disc find
WSL-Mask120
Load, layers merge group
Layers duplicate, layers merge down
This just makes the mask a tad darker lol
Image resize 110%, all layers not clicked
Copy and paste frame 4 as new layer
Image resize about 60%
Open paper of choice in psp
Image resize 40%, drag under frame layer
Erase the parts of the paper outside the frame
I made a new white image 600x600
And flood-filled it with #BA8B48
Then copy and pasted it on my tag and done the above
And added some brushes
Copy and paste Christmas cluster as new layer
Image resize to how small you want it
And place to the bottom left of frame
See my tag for placement if you want
Add dropshadow
Copy and paste your tube of choice as new layer
Add dropshadow
Now add what elements you want on your tag
Adding dropshadow to each layer
Add your name and any copyrights
Layers merge all
Save

Thanks for doing my tut